ALTA wireless accelerometers can be used in a host of applications where knowing impact vibration inclination etc. is required.

The wireless accelerometer - G-Force snapshot sensor activates at a set time interval (defined by user) and measures g-force along X Y and Z axes. Primary use is as an inclinometer or tilt sensor. There are three operating modes ±2 G ±4 G or ±8G. The data displayed is the g-force on each axis e.g. -> X: 0.001 Y: 0.031 Z: 1.01.

ALTA - Leading Enterprise Grade "Internet of Things" Solutions

ALTA sensors offer 3 to 4 times the range of standard sensor platforms extending non-line-of-sight reach to an exceptional 1000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices.

Superior power management provides ALTA sensors with almost twice the battery life of Monnit's standard wireless sensors.

• Coin cell sensors typically last 3+ years.
• AA and Industrial sensors typically last up to 10+ years.

ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages) so security is maintained at all communication points from sensor to gateway gateway to software then back again.

Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage Internet outage or out of range). Messages that can't be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored at which point the messages will all be transmitted.

Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.

• ALTA Wireless Accelerometer - G-Force Snapshot - Commercial Coin Cell Powered
• CR2032 - Coin Cell Battery
• Mounting Hardware