• PORT POWERED 9 PIN 232/422
    PORT POWERED 9 PIN 232/422
1 1

B+B SmartWorx Port - Powered RS-232 to RS-422 Converter

B+B SmartWorx Port - Powered RS-232 to RS-422 Converter

SKU: 1032832833      MFR: Advantech Co. Ltd

GTIN: 835788113792

Product Description

B+B SmartWorx Port - Powered RS-232 to RS-422 Converter - 1 Pack - 1 x RS-232 Serial - 1 x RS-422 Serial

Manufacturer : Advantech Co. Ltd

Manufacturer Part No : 422LP9R

Features

  • With data transfer adapter easily transfer data with high speed
  • High-quality standard Serial adapter

Product Details

Product TypeData Transfer Adapter
Environmentally FriendlyYes
Environmental CertificationRoHS
Connector Type on First EndRS-232 Serial
Connector Type on Second EndRS-422 Serial
Adapter TypeSerial
Connector on First End Details1 x RS-232 Serial
Connector on Second End Details1 x RS-422 Serial
Country of OriginUnited States
Brand NameB+B SmartWorx
ManufacturerAdvantech Co. Ltd
Product Model422LP9R
Product NamePort - Powered RS-232 to RS-422 Converter
Manufacturer Part Number422LP9R
Manufacturer Website Addresshttp://www.advantech.com
Marketing InformationThe 422LP9R is a port - powered two - channel RS - 232 to RS - 422 converter. It converts TD and RD RS - 232 lines to balanced RS - 422 signals. The unit is powered from the RS - 232 handshake lines DTR an d RTS. One of these handshake lines must be asserted (high) in order to power the unit (See Table 1). The RS - 422 driver is enabled when RTS is asserted. Therefore RTS must be asserted in order to transmit data. The RS - 422 receiver is always enabled. If DT R is always asserted and the RTS is used to control the driver the 422LP9R can be used as a RS - 232 to RS - 485 4 - wire converter. To insure reception it is recommended that DTR is asserted.

In order to maximize the amount of power available to the RS - 422 d river the RS - 232 handshake lines are not looped back (tied together). As a result the following handshake lines will appear as disasserted (low): CTS DCD and DSR. Care should be taken to insure that any software being used doesn't require any of these handshake lines be asserted. If existing software requires any of the handshake lines to be asserted you can loop back the required handshake lines in your cable.
Packaged Quantity1
View full details
$193.99 USD
$193.99
Sale Sold out

Out Of Stock


Update

   
Shipping calculated at checkout.

B+B SmartWorx Port - Powered RS-232 to RS-422 Converter - 1 Pack - 1 x RS-232 Serial - 1 x RS-422 Serial

Manufacturer : Advantech Co. Ltd

Manufacturer Part No : 422LP9R

Features

  • With data transfer adapter easily transfer data with high speed
  • High-quality standard Serial adapter

Product Details

Product TypeData Transfer Adapter
Environmentally FriendlyYes
Environmental CertificationRoHS
Connector Type on First EndRS-232 Serial
Connector Type on Second EndRS-422 Serial
Adapter TypeSerial
Connector on First End Details1 x RS-232 Serial
Connector on Second End Details1 x RS-422 Serial
Country of OriginUnited States
Brand NameB+B SmartWorx
ManufacturerAdvantech Co. Ltd
Product Model422LP9R
Product NamePort - Powered RS-232 to RS-422 Converter
Manufacturer Part Number422LP9R
Manufacturer Website Addresshttp://www.advantech.com
Marketing InformationThe 422LP9R is a port - powered two - channel RS - 232 to RS - 422 converter. It converts TD and RD RS - 232 lines to balanced RS - 422 signals. The unit is powered from the RS - 232 handshake lines DTR an d RTS. One of these handshake lines must be asserted (high) in order to power the unit (See Table 1). The RS - 422 driver is enabled when RTS is asserted. Therefore RTS must be asserted in order to transmit data. The RS - 422 receiver is always enabled. If DT R is always asserted and the RTS is used to control the driver the 422LP9R can be used as a RS - 232 to RS - 485 4 - wire converter. To insure reception it is recommended that DTR is asserted.

In order to maximize the amount of power available to the RS - 422 d river the RS - 232 handshake lines are not looped back (tied together). As a result the following handshake lines will appear as disasserted (low): CTS DCD and DSR. Care should be taken to insure that any software being used doesn't require any of these handshake lines be asserted. If existing software requires any of the handshake lines to be asserted you can loop back the required handshake lines in your cable.
Packaged Quantity1

Recently Viewed