Black Box Cisco HD A/D Extension Module Distribution Panel
Black Box Cisco HD A/D Extension Module Distribution Panel
SKU: 1013261052 MFR: Black Box Corporation
GTIN: 822088063773
Product Description
Black Box Cisco HD A/D Extension Module Distribution Panel - For Data Networking - 24 x RJ-11 8 x RJ-45 LAN 1 x RJ-21 - Twisted Pair - Rack-mountable - TAA Compliant
Manufacturer : Black Box Corporation
Manufacturer Part No : JPM2194A
Features
- Make up to 24 analog and 8 digital connections to a Cisco® 8-port extension module.
- Neatly arranges cables for analog and digital phone service to your Cisco router-simply plug-and-play.
- Guaranteed for life!
Product Details
- Designed for use with the Cisco 8-port extension module (which brings analog and digital Internet phone fax and modem service to Cisco 2821 2851 2901 2911 2921 3825 3845 3925 3925E 3945 and 3945E integrated services routers).
- With support for up to 24 total voice and fax sessions the module is ideal for networks with high analog (foreign exchange station [FXS] direct inward dialing [DID] and foreign exchange office [FXO] and digital (Basic Rate Interface [BRI]) call-capacity requirements.
- Three-part design includes BASE EM0 and EM1 connectors.
- Helps enable packet voice technologies such as Voice over IP (VoIP) by distributing digital and analog signals from legacy analog phone systems and/or Internet phones.
- Accommodates RJ-11 and RJ-45 combinations.
- Use telco cable (ELN29T-MF) to attach the telco connector on the back of the panel to the telco connector on the Cisco EVM-HD module that's installed in your router.
The panel consists of 24 RJ-11 connectors (labeled BASE) for connection to analog phones. It also has 8 RJ-45 connectors on the panel's center and right sides (labeled EM0 and EM1) for connection to digital phones faxes and modems. The center and right-side connectors have a sliding plate that enables you to choose either the top (RJ-11) or bottom (RJ-45) row of connectors for use. Select the connectors you will use by sliding the connector cover over the unused ports. (NOTE: You should not plug cables into the center top [RJ-11] and bottom [RJ-45] or the right-side top [RJ-11] and bottom [RJ-45] connectors at the same time. The sliding panel prevents this from happening.)
Four combinations of connectors are available depending on which connectors are covered with the sliding plate. Link up to eight analog phones via RJ-11 cable (EL06M-MM) to the connectors labeled BASE on the panel's left side and attach 8 12 or 16 digital Internet phones fax machines or modems via RJ-11 (EL06M-MM) or RJ-45 cable (EVNSL51) to the connectors labeled EM0 or EM1 on the panel's right side.
Out Of Stock
Update
Couldn't load pickup availability
![CISCO HD A/D EXTENSION MODULE D](http://tekmentum.com/cdn/shop/files/1013261052.jpg?v=1694731406&width=1445)
Black Box Cisco HD A/D Extension Module Distribution Panel - For Data Networking - 24 x RJ-11 8 x RJ-45 LAN 1 x RJ-21 - Twisted Pair - Rack-mountable - TAA Compliant
Manufacturer : Black Box Corporation
Manufacturer Part No : JPM2194A
Features
- Make up to 24 analog and 8 digital connections to a Cisco® 8-port extension module.
- Neatly arranges cables for analog and digital phone service to your Cisco router-simply plug-and-play.
- Guaranteed for life!
Product Details
- Designed for use with the Cisco 8-port extension module (which brings analog and digital Internet phone fax and modem service to Cisco 2821 2851 2901 2911 2921 3825 3845 3925 3925E 3945 and 3945E integrated services routers).
- With support for up to 24 total voice and fax sessions the module is ideal for networks with high analog (foreign exchange station [FXS] direct inward dialing [DID] and foreign exchange office [FXO] and digital (Basic Rate Interface [BRI]) call-capacity requirements.
- Three-part design includes BASE EM0 and EM1 connectors.
- Helps enable packet voice technologies such as Voice over IP (VoIP) by distributing digital and analog signals from legacy analog phone systems and/or Internet phones.
- Accommodates RJ-11 and RJ-45 combinations.
- Use telco cable (ELN29T-MF) to attach the telco connector on the back of the panel to the telco connector on the Cisco EVM-HD module that's installed in your router.
The panel consists of 24 RJ-11 connectors (labeled BASE) for connection to analog phones. It also has 8 RJ-45 connectors on the panel's center and right sides (labeled EM0 and EM1) for connection to digital phones faxes and modems. The center and right-side connectors have a sliding plate that enables you to choose either the top (RJ-11) or bottom (RJ-45) row of connectors for use. Select the connectors you will use by sliding the connector cover over the unused ports. (NOTE: You should not plug cables into the center top [RJ-11] and bottom [RJ-45] or the right-side top [RJ-11] and bottom [RJ-45] connectors at the same time. The sliding panel prevents this from happening.)
Four combinations of connectors are available depending on which connectors are covered with the sliding plate. Link up to eight analog phones via RJ-11 cable (EL06M-MM) to the connectors labeled BASE on the panel's left side and attach 8 12 or 16 digital Internet phones fax machines or modems via RJ-11 (EL06M-MM) or RJ-45 cable (EVNSL51) to the connectors labeled EM0 or EM1 on the panel's right side.
Recently Viewed
We’re a veteran-owned small business with full-stack expertise. We’ll help you design, coordinate, and manage technology solutions that will drive your business forward.
- About Us
- Contact Us
- My Account
- Prospective Investors
Quick Links
Contracts
Contact Us
-
6402 Corporate Dr, Suite 103,
Indianapolis, IN 46278 - (317) 243-1750
- sales@tekmentum.com
- Mon-Fri: 8:00am-5:00pm
© 2005-2023, Tekmentum. All Rights Reserved. A KPaul, LLC Company.
- Choosing a selection results in a full page refresh.
- Opens in a new window.