Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN Network Interface Module
Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN Network Interface Module
SKU: 1073401730 MFR: Cisco Systems Inc
Product Description
Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN Network Interface Module - For Data Networking - 1 x 2.5GBase-T RJ-45 Network - Twisted Pair2.5 Gigabit Ethernet - 2.5GBase-T - 2.50 Gbit/sWAN Interface Card (WIC) Network Interface Module (NIM) - Plug-in Module
Manufacturer : Cisco Systems Inc
Manufacturer Part No : C-NIM-1M
Features
- Network Module offers better usage with maximum efficiency and convenience
- 2.5GBase-T network technology for fast dependable connectivity with maximum efficiency
- 2.5 Gigabit Ethernet Ethernet technology for a reliable convenient way of communication and connectivity
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- Plug-in Module form factor for added reliability and dependability
- Network Module with data networking application/usage for maximum productivity and usability
Product Details
Catalyst 8000 Edge Series:
- 8300
- 8200
- 8200L
The Cisco Catalyst 8000 Gigabit Ethernet WAN Modules bring high-density Small Form-Factor Pluggable (SFP+ and SFP) and copper (RJ-45) connectivity supporting 100 Mbps 1 Gbps and 10 Gbps Ethernet to the Catalyst 8300 and 8200 Series Edge Platforms.
These modules replace the Network Interface Module (NIM) and Single-Wide Enhanced Service Module (SM-X) Ethernet WAN modules supported on the Cisco 4000 Series Integrated Services Routers. Providing maximum flexibility the modules accelerate applications such as Ethernet WAN access Cisco SD-WAN and other high-speed connectivity options to the LAN top-of-rack data center switches and servers. Support for SD-WAN and vManage is available from day 1 on all these modules.
The ports on these modules work as routed Layer 3 ports. All the features supported on the router's embedded WAN ports are also available with these WAN modules.
Layer 2 switching between local ports on the module or between ports on the module and other ports within the router system is not supported. The ports on these modules terminate Layer 2 trunks from externally connected switches. As such Layer 2 trunk and VLAN information is not carried over onto other ports in the system. The host router routes all traffic entering these modules.
Power over Ethernet (PoE IEEE 802.3 af/at/bt) is supported on the C-NIM-1M module.
This data sheet also covers the SM-NIM Carrier Adapter for the Catalyst 8300 Series. This carrier card enables all combinations of voice WAN and LAN modules to be hot-swappable and functioning in a Service Module (SM) slot. Up to 2 NIMs are supported per carrier card without any performance or functionality limitations.
Out Of Stock
Update
Couldn't load pickup availability
![Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN Network Interface Module](http://tekmentum.com/cdn/shop/files/1073401730.jpg?v=1696618985&width=1445)
Cisco 1 Port 2.5-Gbps/1-Gbps RJ-45 WAN Network Interface Module - For Data Networking - 1 x 2.5GBase-T RJ-45 Network - Twisted Pair2.5 Gigabit Ethernet - 2.5GBase-T - 2.50 Gbit/sWAN Interface Card (WIC) Network Interface Module (NIM) - Plug-in Module
Manufacturer : Cisco Systems Inc
Manufacturer Part No : C-NIM-1M
Features
- Network Module offers better usage with maximum efficiency and convenience
- 2.5GBase-T network technology for fast dependable connectivity with maximum efficiency
- 2.5 Gigabit Ethernet Ethernet technology for a reliable convenient way of communication and connectivity
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- Plug-in Module form factor for added reliability and dependability
- Network Module with data networking application/usage for maximum productivity and usability
Product Details
Catalyst 8000 Edge Series:
- 8300
- 8200
- 8200L
The Cisco Catalyst 8000 Gigabit Ethernet WAN Modules bring high-density Small Form-Factor Pluggable (SFP+ and SFP) and copper (RJ-45) connectivity supporting 100 Mbps 1 Gbps and 10 Gbps Ethernet to the Catalyst 8300 and 8200 Series Edge Platforms.
These modules replace the Network Interface Module (NIM) and Single-Wide Enhanced Service Module (SM-X) Ethernet WAN modules supported on the Cisco 4000 Series Integrated Services Routers. Providing maximum flexibility the modules accelerate applications such as Ethernet WAN access Cisco SD-WAN and other high-speed connectivity options to the LAN top-of-rack data center switches and servers. Support for SD-WAN and vManage is available from day 1 on all these modules.
The ports on these modules work as routed Layer 3 ports. All the features supported on the router's embedded WAN ports are also available with these WAN modules.
Layer 2 switching between local ports on the module or between ports on the module and other ports within the router system is not supported. The ports on these modules terminate Layer 2 trunks from externally connected switches. As such Layer 2 trunk and VLAN information is not carried over onto other ports in the system. The host router routes all traffic entering these modules.
Power over Ethernet (PoE IEEE 802.3 af/at/bt) is supported on the C-NIM-1M module.
This data sheet also covers the SM-NIM Carrier Adapter for the Catalyst 8300 Series. This carrier card enables all combinations of voice WAN and LAN modules to be hot-swappable and functioning in a Service Module (SM) slot. Up to 2 NIMs are supported per carrier card without any performance or functionality limitations.
Recently Viewed
We’re a veteran-owned small business with full-stack expertise. We’ll help you design, coordinate, and manage technology solutions that will drive your business forward.
- About Us
- Contact Us
- My Account
- Prospective Investors
Quick Links
Contracts
Contact Us
-
6402 Corporate Dr, Suite 103,
Indianapolis, IN 46278 - (317) 243-1750
- sales@tekmentum.com
- Mon-Fri: 8:00am-5:00pm
© 2005-2023, Tekmentum. All Rights Reserved. A KPaul, LLC Company.
- Choosing a selection results in a full page refresh.
- Opens in a new window.