Cisco Multimode G.SHDSL Network Interface Module
Cisco Multimode G.SHDSL Network Interface Module
SKU: 1054268339 MFR: Cisco Systems Inc
Product Description
Cisco Multimode G.SHDSL Network Interface Module - For Data Networking - 1 x RJ-45 G.SHDSL Ethernet - Twisted PairEthernet - G.SHDSL - 15 Mbit/s
Manufacturer : Cisco Systems Inc
Manufacturer Part No : NIM-4SHDSL-EA=
Features
- Interface Module offers enhanced dependability with maximum productivity
- With G.SHDSL technology get up to 5696kbps high-speed symmetrical data streams over service provider link using a single pair of copper wires
- With Ethernet connections connect your networking devices with the speed of up to 10Mbps
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- Interface Module with data networking application/usage for maximum dependability and convenience
Product Details
Cisco 4000 Series Integrated Services Routers
Product Overview
Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths bonding of multiple pairs (4-wire m-pair inverse multiplexing over EFM bonding) is supported.
In EFM mode the multimode G.SHDSL NIM allows bonding as defined by IEEE 802.3ah and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service the maximum data rate is 61.4 Mbps with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.).
In ATM mode the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.)
The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL) Single-line DSL (SDSL) T1 E1 and services beyond E1.
The multimode four-pair G.SHDSL NIM together with the ISR 4000 series router provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).
Out Of Stock
Update
Cisco Multimode G.SHDSL Network Interface Module - For Data Networking - 1 x RJ-45 G.SHDSL Ethernet - Twisted PairEthernet - G.SHDSL - 15 Mbit/s
Manufacturer : Cisco Systems Inc
Manufacturer Part No : NIM-4SHDSL-EA=
Features
- Interface Module offers enhanced dependability with maximum productivity
- With G.SHDSL technology get up to 5696kbps high-speed symmetrical data streams over service provider link using a single pair of copper wires
- With Ethernet connections connect your networking devices with the speed of up to 10Mbps
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- Interface Module with data networking application/usage for maximum dependability and convenience
Product Details
Cisco 4000 Series Integrated Services Routers
Product Overview
Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths bonding of multiple pairs (4-wire m-pair inverse multiplexing over EFM bonding) is supported.
In EFM mode the multimode G.SHDSL NIM allows bonding as defined by IEEE 802.3ah and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service the maximum data rate is 61.4 Mbps with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.).
In ATM mode the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.)
The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL) Single-line DSL (SDSL) T1 E1 and services beyond E1.
The multimode four-pair G.SHDSL NIM together with the ISR 4000 series router provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).
Recently Viewed
We’re a veteran-owned small business with full-stack expertise. We’ll help you design, coordinate, and manage technology solutions that will drive your business forward.
- About Us
- Contact Us
- My Account
- Prospective Investors
Quick Links
Contracts
Contact Us
-
6402 Corporate Dr, Suite 103,
Indianapolis, IN 46278 - (317) 243-1750
- sales@tekmentum.com
- Mon-Fri: 8:00am-5:00pm
© 2005-2023, Tekmentum. All Rights Reserved. A KPaul, LLC Company.
- Choosing a selection results in a full page refresh.
- Opens in a new window.