ComNet 8 Port Ethernet-over-UTP Extender Local 1 RU 19" Rack Mount
ComNet 8 Port Ethernet-over-UTP Extender Local 1 RU 19" Rack Mount
SKU: 1049889391 MFR: ACRE
GTIN: 0845770010695
Product Description
ComNet 8 Port Ethernet-over-UTP Extender Local 1 RU 19" Rack Mount - 8 x Network (RJ-45) - 5000 ft Extended Range
Manufacturer : ACRE
Manufacturer Part No : CLFE8EOU
Product Details
The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5 UTP) or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four eight and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote 10 or 100Mbps and 1 pair or 4 pair (UTP) settings.
Features
- Full 10/100 Mbps Bandwidth
- Supports Multicast Unicast and Jumbo Frame
- Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance
- User-selectable data rate for maximum bandwidth and transmission distance utilization.
- Complies with all major IEEE standards and RFC network protocols for UDP TCP/IP HTTP/HTTPs
- Designed and manufactured in the USA
- Transmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable
- Extends Ethernet up to 3000 feet (914 m) at 10 Mbps or 2000 feet (610 m) at 100 Mbps over UTP cable
- Extends Ethernet up to 5000 feet (1524 m) at 10 Mbps or 2000 feet (610m) at 100 Mbps over Coaxial cable
- Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet
- Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature mechanical shock vibration humidity with condensation high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Applications
- Retrofit existing analog CCTV installations to Ethernet-based systems
- CCTV systems for casinos airports school campuses
- Network Protocols: UDP TCP/IP HTTP/HTTPs
- Connectors: RJ-45 Ethernet BNC Coax Female
- Weight: 5 lbs
Out Of Stock
Update
ComNet 8 Port Ethernet-over-UTP Extender Local 1 RU 19" Rack Mount - 8 x Network (RJ-45) - 5000 ft Extended Range
Manufacturer : ACRE
Manufacturer Part No : CLFE8EOU
Product Details
The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5 UTP) or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four eight and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote 10 or 100Mbps and 1 pair or 4 pair (UTP) settings.
Features
- Full 10/100 Mbps Bandwidth
- Supports Multicast Unicast and Jumbo Frame
- Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance
- User-selectable data rate for maximum bandwidth and transmission distance utilization.
- Complies with all major IEEE standards and RFC network protocols for UDP TCP/IP HTTP/HTTPs
- Designed and manufactured in the USA
- Transmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable
- Extends Ethernet up to 3000 feet (914 m) at 10 Mbps or 2000 feet (610 m) at 100 Mbps over UTP cable
- Extends Ethernet up to 5000 feet (1524 m) at 10 Mbps or 2000 feet (610m) at 100 Mbps over Coaxial cable
- Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet
- Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature mechanical shock vibration humidity with condensation high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Applications
- Retrofit existing analog CCTV installations to Ethernet-based systems
- CCTV systems for casinos airports school campuses
- Network Protocols: UDP TCP/IP HTTP/HTTPs
- Connectors: RJ-45 Ethernet BNC Coax Female
- Weight: 5 lbs
Recently Viewed
We’re a veteran-owned small business with full-stack expertise. We’ll help you design, coordinate, and manage technology solutions that will drive your business forward.
- About Us
- Contact Us
- My Account
- Prospective Investors
Quick Links
Contracts
Contact Us
-
6402 Corporate Dr, Suite 103,
Indianapolis, IN 46278 - (317) 243-1750
- sales@tekmentum.com
- Mon-Fri: 8:00am-5:00pm
© 2005-2023, Tekmentum. All Rights Reserved. A KPaul, LLC Company.
- Choosing a selection results in a full page refresh.
- Opens in a new window.