The ACM7000-L Resilience Gateway ensures uptime at branch offices retail stores kiosks and other remote sites. Cellular access provides an always-on gateway to your off-site network devices even when the primary network is down.

Identify and remediate issues at the network edge before they become failures with Smart OOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities.

• 4-8 serial ports out-of-band management of network and server devices
• 4 x USB 2.0 console ports out-of-band management of network and server devices
• Smart OOB extends beyond traditional out-of-band management
• Failover to Cellular™ and IP Passthrough for out-of-band access and failover network connectivity over cellular.
• Integrated RESTful API engine on devices running firmware 4.0 or higher
• Manage all edge routers firewalls UPSes PDUs with serial & USB & Ethernet consoles
• Centralize the management of all your enterprise remote sites and data centers with Lighthouse 5
• Automatically detect and recover from outages and repair equipment faults
• Link Layer Discovery Protocol (LLDP) discover identify and verify attached devices on your local network.
• Log audit trails to embedded 4GB local storage for troubleshooting and compliance
• Strong security PCI DSS 3.2 FIPS140-2 SSL and SSH stateful firewall OpenVPN & IPsec
• Embedded internal temperature sensor
• Environmental and physical sensor alarm notification via SMS SNMP or email

• ACM7000-L Resilience Gateway
• Rack Mount Kit - Ear and Screw (Part# 590003)
• 1 x Digital I/O Black Terminal Block (Part# 319115)
• DB9F-RJ45 Straight Adapter (Part# 319015)
• 4 x Rubber Feet (Part# 370003)
• 12VDC Universal Power Supply (Part# 450031)
• 2 x 4G Cellular Blade Antennas
• 1 x ACM7000-L Antenna Extension Kit (Part# 590051) (-L variants only)
• Quick Start Guide

• 4 serial Cisco Straight pinout ext power 1 GbE Ethernet or fiber SFP & 4 port GbE switch Global LTE-A Pro Cellular module dual SIM 2 DIO and 2 output ports

Models & Connectors:

• All serial ports are RJ45 RS-232 (50 to 230400bps Cisco pinout)
• 2 x RJ45 10/100/1000 Ethernet ports primary and failover
• 4 x USB 2.0 console port
• 2 x TTL level Digital I/O ports (DIO) 5V DC max @ 20mA (supports external water /smoke / motion dry contact sensors)
• 2 x High Voltage Digital Outputs (HVDO) 5-30V DC@ 100mA (drives relays alarms etc.)
• 110-240V AC to 12V DC external power adapter
• 11.5 W total consumption

• Humidity: 5% to 90%
• Ambient operating temperature: -25°C to 60°C (-13°F to 140°F)
• Non-operating storage temp: -40°C to 75°C (-40°F to 167°F)

Emissions: EN 55022:2010 CISPR 22:2008 FCC Part 15 Subpart B:2015 ICES-003 Issue 5 (2014) AS/NZS CISPR 22:2009+A1:2010 EN 61000-3-2:2006/A2:2009 EN 61000-3-3:2008

Immunity: EN 55024:2010 CISPR 24:2010 EN 61000-4-2:2009 EN 61000-4-3:2006+A2:2010 EN 61000-4-4:2004+A1:2010 EN 61000-4-5:2006 EN 61000-4-6:2009 EN 61000-4-8:2010 EN 61000-4-11:2004

Isolation:

• Serial Port: 4kV ESD protection on RS-232 transceivers
• Ethernet Port: 1500V AC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Other Agency Approvals: CE UL 1950 TUV C-Tick Security features to support PCI DSS 3.2 compliance NERC CIP standards FIPS 140-2 validated module Certificate #2473

Memory & CPU:

• 800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11)
• 256MB DDR3 SDRAM 32MB Embedded Flash and 4GB Internal NAND Flash

MTBF: AC-DC (12V) adapter - 100000 hours

Operating System: Linux with source code access and Custom Development Kit (CDK)

Security & Authentication: IPsec & OpenVPN SSL tunnels Secure Shell (SSH V2) TACACS+ Kerberos RADIUS and LDAP authentication PAP/CHAP authentication (dial up) Dial back support Local authentication System event syslog Authenticated NTP

Gateway Router: Stateful firewall DHCP server DDNS Port forwarding IP filtering with access control lists

Remote Management: HTTPS & SSH console Nagios NSCA & NRPE SNMP TFTP & FTP server Password access control IP service port control AJAX web terminal Auto Response RESTful APIs

Cellular Specifications for: ACM7000-L

• SIM Slot: Dual Push Click 2FF SIM slots
• Modem Device: These models utilize the Sierra Wireless EM7565. This a global cellular module ceritfied CE FCC GCF IC JRF/JPA NCC PTCRB
• Connectors: 2 x SMA connectors for cellular with diversity and 1 x SMA connector for GPS
• Air Interface: LTE-A Pro (LTE-LAA) HSPA+
• Frequency Bands:4G LTE B1 B2 B3 B4 B5 B7 B8 B9 B12 B13 B18 B19 B20 B26 B28 B29 B30 B32 B41 B42 B43 B46 B48 B66 3G HSPA+ B1 B2 B4 B5 B6 B8 B9 B19
• Data Services: Transfer rate (peak): Download 600 Mbps/Upload 150 Mbps CAT-12