Protects Mission-Critical Rack-Mounted Equipment

• Provides fully regulated sine wave AC output for servers network storage devices and telecom hardware
• Audible alarm signals loss of utility power overload low battery and fault conditions
• 8 NEMA 5-15R outlets
• 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
• 0.9 power factor rating
• 570-joule surge suppression rating

Reliable Battery Backup

• Supports half load up to 13 min. and full load up to 4.5 min.
• Internal batteries designed for hot-swap field replacement
• 95% line-power efficiency rating saves money in energy costs

2 Load Banks with Switchable Outlets

• Can control 4 outlets remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

• Maintains 120V nominal output over input range of 83V-147V without using battery power

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

Interactive LCD Screen

• Front-panel LCD signals operating mode load level voltage battery charge and estimated runtimes
• Rotates for easy viewing in rack-mount or tower configurations

Network Management Cards

• Compatible with Tripp Lite UPS management card options TLNETCARD WEBCARDLX SNMPWEBCARD and RELAYIOCARD

Communications Ports

• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software available via FREE download from
• EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

• EPO">
  Versatile Installation Options
  

• EPO">
  • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
  • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
  • Mounts in upright tower position with optional 2-9USTAND accessory

• EPO">

• SmartPro 1500RM2U UPS
• Mounting hardware for 4 post rackmount installation
• Cabling for USB & DB9 monitoring and EPO switching
• PowerAlert unattended shutdown and UPS/Power monitoring software
• Warranty information

• SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages voltage regulation during brownouts and overvoltages plus network grade AC surge suppression
• 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking telecom and other sensitive electronic devices
• Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories 2 post mountable with optional 2POSTRMKIT accessory upright tower installation supported with optional
• 2-9USTAND accessory
• Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts)
• Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
• Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
• PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging pager & email notification event logging and running user-defined script commands
• Offers simultaneous monitoring by up to 3 directly-connected devices through included USB DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD) or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
• Communications ports support messaging of UPS and line power status including on battery low-battery power restored AC line voltage DC battery voltage and remaining battery capacity
• Supports timed inverter shutoff after unattended shutdown activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
• Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
• Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
• Emergency Power Off (EPO) interface with cable
• Multi-function audible alarms and set of 5 front panel LEDs
• Network-grade AC surge suppression
• Attractive all-black color scheme
• UPS battery set ships fully assembled and ready for installation no time consuming connection of internal batteries by user is necessary
• This unit has an LCD screen
• Two year warranty with $250000 connected equipment insurance (USA & Canada only)