• VELCRO® 90086 General Purpose Sticky Back
1 1

VELCRO® 90086 General Purpose Sticky Back

VELCRO® 90086 General Purpose Sticky Back

SKU: 1012149925      MFR: Velcro Companies

Product Description

VELCRO® 90086 General Purpose Sticky Back - 5 ft Length x 0.75" Width - Dispenser Included - For Multipurpose - 1 Each - Black

Manufacturer : Velcro Companies

Manufacturer Part No : 90086

Features

  • Holds up to 5 lbs (1 lb per 1" square)
  • Long lasting nylon construction with simple peel and stick application
  • Ideal for smooth surfaces including walls glass tile and plastic
  • For keeping things organized and connected

Product Details

Product TypeHook & Loop Fastener
Dispenser IncludedYes
Product ColorBlack
Country of OriginUnited States
RecycledNo
Brand NameVELCRO®
Application/UsageMultipurpose
Packaged Quantity1 Each
Tape Length5 ft
Tape Width0.75"
ManufacturerVelcro Companies
Product Name90086 General Purpose Sticky Back
Product LineSticky Back
Manufacturer Part Number90086
Manufacturer Website Addresshttp://www.velcro.com
Marketing InformationSticky Back Tape adheres to most smooth surfaces. Use on walls glass tile plastic or metal. Tape works in conjunction with other fasteners or adheres to itself.

More from the Manufacturer
Weight (Approximate)3.57 oz
Assembly RequiredNo
Additional Information

Shape:

Roll

Care and Application:

Instructions:

  • Clean and dry surface before application.
  • Peel tape from fastener and press firmly into place.
  • Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

  • Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
  • Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
  • Warm the adhesive with the hair dryer (again do not use a heat gun) peel off a piece and roll in a ball
  • Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
  • Stick the ball on the adhesive which is on your substrate and pull it off
  • Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
  • If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone acetone WD-40 mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)
View full details
$13.99 USD
$13.99
Sale Sold out

Dropship


Update

   
Shipping calculated at checkout.

VELCRO® 90086 General Purpose Sticky Back - 5 ft Length x 0.75" Width - Dispenser Included - For Multipurpose - 1 Each - Black

Manufacturer : Velcro Companies

Manufacturer Part No : 90086

Features

  • Holds up to 5 lbs (1 lb per 1" square)
  • Long lasting nylon construction with simple peel and stick application
  • Ideal for smooth surfaces including walls glass tile and plastic
  • For keeping things organized and connected

Product Details

Product TypeHook & Loop Fastener
Dispenser IncludedYes
Product ColorBlack
Country of OriginUnited States
RecycledNo
Brand NameVELCRO®
Application/UsageMultipurpose
Packaged Quantity1 Each
Tape Length5 ft
Tape Width0.75"
ManufacturerVelcro Companies
Product Name90086 General Purpose Sticky Back
Product LineSticky Back
Manufacturer Part Number90086
Manufacturer Website Addresshttp://www.velcro.com
Marketing InformationSticky Back Tape adheres to most smooth surfaces. Use on walls glass tile plastic or metal. Tape works in conjunction with other fasteners or adheres to itself.

More from the Manufacturer
Weight (Approximate)3.57 oz
Assembly RequiredNo
Additional Information

Shape:

Roll

Care and Application:

Instructions:

  • Clean and dry surface before application.
  • Peel tape from fastener and press firmly into place.
  • Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

  • Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
  • Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
  • Warm the adhesive with the hair dryer (again do not use a heat gun) peel off a piece and roll in a ball
  • Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
  • Stick the ball on the adhesive which is on your substrate and pull it off
  • Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
  • If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone acetone WD-40 mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)

Recently Viewed