• Veracity HIGHWIRE Powerstar Quad
    Veracity HIGHWIRE Powerstar Quad
1 1

Veracity HIGHWIRE Powerstar Quad

Veracity HIGHWIRE Powerstar Quad

SKU: 1035066512      MFR: Veracity USA Inc

GTIN: 035496220397

Product Description

Veracity HIGHWIRE Powerstar Quad - 4 x Network (RJ-45) - 1640.42 ft Extended Range

Manufacturer : Veracity USA Inc

Manufacturer Part No : VHW-HWPS-C4

Product Details

Product TypeNetwork Extender
Product FamilyHIGHWIRE Powerstar
TAA CompliantYes
Maximum Extended Range1640.42 ft
Brand NameVeracity
Environmentally FriendlyYes
Environmental CertificationRoHS
Maximum Data Transfer Rate25 MB/s
Number of Network (RJ-45) Ports4
Network (RJ-45)Yes
Certifications & Standards
  • CE
  • FCC
ManufacturerVeracity USA Inc
Product NameHIGHWIRE Powerstar Quad
Product LineHIGHWIRE Powerstar
Manufacturer Part NumberVHW-HWPS-C4
Manufacturer Website Addresshttp://www.veracityusa.com
Marketing InformationConnect up to four IP cameras with HIGHWIRE Powerstar Quad over an existing coax cable

HIGHWIRE Powerstar Quad uses existing coax cabling as a reliable Ethernet network connection and is very easy to use and fast to install.

Ethernet Over Coax

HIGHWIRE Powerstar Quad's unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable such as the highresistance copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence while a quick check of the SafeView™ power level display reaffirms that the device connections will continue to be reliable whatever the cable used.

For predictable network operation with no restrictions HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. For full information on POE-over-Coax™ distances achievable please refer to the Range Table in the HIGHWIRE Powerstar datasheet or on the Veracity website. For POE power budget and power supply options see the POE Power Budget Table opposite.

HIGHWIRE Powerstar QUAD

The QUAD variant of HIGHWIRE is designed for the camera end of the coax and with an integrated four-port POE switch enables connection of up to four IP cameras over a single coax. With no need to configure IP addresses set DIP switches or make awkward measurements and calculations installing HIGHWIRE Powerstar QUAD is simple. The Base end of the coax is driven by single-channel 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The QUAD unit can be powered either by POE over coax delivering a maximum total POE power budget of 25 watts or by one of the optional local PSUs delivering 40 or 78 watts. HIGHWIRE Powerstar Quad features Veracity's unique SafeView™ display to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.

HIGHWIRE Powerstar Quad allows one analogue camera to be replaced with four IP cameras

POE over Coax or Local Power

 In the simplest implementation (shown below left) the BASE unit receives power from a standard POE switch or Veracity's 57V DC PSU and transmits POE over the coax. The QUAD unit receives this power and delivers up to 25 watts shared between up to four IP cameras. No external power cabling is required and all detection and setup occurs automatically. For higher POE power budgets an optional Veracity 57V DC PSU may be used to power the QUAD locally at the camera end (shown below right) delivering 40 watts or 78 watts depending on PSU model. See POE budget table for details
View full details
$585.99 USD
$585.99
Sale Sold out

Back Order

Get it by Thu, Jun 05 - Tue, Jun 10


Update

   
Shipping calculated at checkout.

Veracity HIGHWIRE Powerstar Quad - 4 x Network (RJ-45) - 1640.42 ft Extended Range

Manufacturer : Veracity USA Inc

Manufacturer Part No : VHW-HWPS-C4

Product Details

Product TypeNetwork Extender
Product FamilyHIGHWIRE Powerstar
TAA CompliantYes
Maximum Extended Range1640.42 ft
Brand NameVeracity
Environmentally FriendlyYes
Environmental CertificationRoHS
Maximum Data Transfer Rate25 MB/s
Number of Network (RJ-45) Ports4
Network (RJ-45)Yes
Certifications & Standards
  • CE
  • FCC
ManufacturerVeracity USA Inc
Product NameHIGHWIRE Powerstar Quad
Product LineHIGHWIRE Powerstar
Manufacturer Part NumberVHW-HWPS-C4
Manufacturer Website Addresshttp://www.veracityusa.com
Marketing InformationConnect up to four IP cameras with HIGHWIRE Powerstar Quad over an existing coax cable

HIGHWIRE Powerstar Quad uses existing coax cabling as a reliable Ethernet network connection and is very easy to use and fast to install.

Ethernet Over Coax

HIGHWIRE Powerstar Quad's unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable such as the highresistance copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence while a quick check of the SafeView™ power level display reaffirms that the device connections will continue to be reliable whatever the cable used.

For predictable network operation with no restrictions HIGHWIRE technology delivers a full 200Mbit/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. For full information on POE-over-Coax™ distances achievable please refer to the Range Table in the HIGHWIRE Powerstar datasheet or on the Veracity website. For POE power budget and power supply options see the POE Power Budget Table opposite.

HIGHWIRE Powerstar QUAD

The QUAD variant of HIGHWIRE is designed for the camera end of the coax and with an integrated four-port POE switch enables connection of up to four IP cameras over a single coax. With no need to configure IP addresses set DIP switches or make awkward measurements and calculations installing HIGHWIRE Powerstar QUAD is simple. The Base end of the coax is driven by single-channel 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The QUAD unit can be powered either by POE over coax delivering a maximum total POE power budget of 25 watts or by one of the optional local PSUs delivering 40 or 78 watts. HIGHWIRE Powerstar Quad features Veracity's unique SafeView™ display to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.

HIGHWIRE Powerstar Quad allows one analogue camera to be replaced with four IP cameras

POE over Coax or Local Power

 In the simplest implementation (shown below left) the BASE unit receives power from a standard POE switch or Veracity's 57V DC PSU and transmits POE over the coax. The QUAD unit receives this power and delivers up to 25 watts shared between up to four IP cameras. No external power cabling is required and all detection and setup occurs automatically. For higher POE power budgets an optional Veracity 57V DC PSU may be used to power the QUAD locally at the camera end (shown below right) delivering 40 watts or 78 watts depending on PSU model. See POE budget table for details

Recently Viewed